Product Parameters
Introduction of WQ series Sewage Submersible Pump
QD series submersible sewage pump is mainly used for municipal work, industrial building, hotels, hospitals, civil air defense, mines, etc. It can be widely used in transfer waste water, rainwater and living water etc. which contains solid grains and various long fibers CNBM QD series sewage submersible pump have many advantages, such as, hi-efficiency, circumvolution proof, blockage free, auto-coupling, hi-reliability and auto-control, etc.
Operation Condition of WQ Series Sewage Submersible Pump
1). Rated Voltage: 380V/460V, Frequency: 50Hz/60Hz, 3-phase AC.
2). Temperature of medium under 40ºC.
3). PH value: 4~10.
4). Volume ratio of solid in medium below 2%.
5). Density of medium should be lower than 12000kg/m³.
Structure Characteristic of WQ Series Sewage Submersible Pump
QD series submersible sewage pump is equipped with status indicator and protection device to ensure for pump safe and reliable operating.
1). The unique cable airproof is adopted, avoid leakage of cable.
2). Heat protector in stator assure of operating life of the motor.
3). The pump adopts outer recycling cooling design with motor power more than 18.5kw, which can keep the pump operating safely under the lowest water level.
4). A floating switch is installed at the bottom of motor chamber to protect the mechanical seal in the motor side.
5). The oil-water probe is installed at the up end of the oil chamber between pump and motor that can protect the mechanical seal in the side. If leakage occurs, the system will signalize and start protection.
6). Adopt perfect mechanical seal, the sealing material adopt tungsten carbide, silicon carbide and hard metal alloy, which can prevent the water from entering into the motor, and keep the operating reliable and safety.
7). The auxiliary impeller can balance the pressure outside of the mechanical seal, prevent the water entering into the oil chamber and prolong the life of the motor.
8). Unique impeller design, wide passage allow large solid and long fiber passing through freely, it features non-clog, convolve-proof and good passing ability.
9). The changeable wearing ring is installed between the impeller and the volute to keep the optimum operation conditions.
5. Impeller Design Characteristics of QD Series Sewage Submersible Pump
For the feculence pass freely, it must be widen the flowing passage of impeller, for the big pump, can used for double-vane, or three-vane, for the small pump, it used for single(double) flowing passage, like a bent pipe has same section, it has a good passing characteristic, avoid stop, convolve caused by slowing current possibly. The especially flowing passage of impeller, cooperate with logical volute, made the paper, soft goods, garbage bag and other material in sewage can passing freely and the pump have no vibration in the course of running-in and load through the impeller balance between dynamic and static state.
technical parameter
Model
|
Flow |
Head |
Power |
speed(r/min) |
voltage(v) |
Piping(mm |
Stator |
gw(kg) |
| QD3-35/2-1.1 |
3 |
35 |
1.1 |
3000 |
220 |
25 |
12*160 |
20.4 |
| Q3-35/2-1.1 |
3 |
35 |
1.1 |
3000 |
380 |
25 |
12*140 |
20.4 |
| QD3-48/3-1.5 |
3 |
48 |
1.5 |
3000 |
220 |
25 |
12*170 |
23 |
| Q3-48/3-1.5 |
3 |
48 |
1.5 |
3000 |
380 |
25 |
12*160 |
23 |
| QD3-48/3-1.1 |
3 |
48 |
1.1 |
3000 |
220 |
25 |
12*180 |
23.5 |
| Q3-48-3-1.1 |
3 |
48 |
1.1 |
3000 |
380 |
25 |
12*160 |
/ |
| QD3-62/4-1.5 |
3 |
62 |
1.5 |
3000 |
220 |
25 |
12*260 |
26.5 |
| Q3-62/4-1.5 |
3 |
62 |
1.5 |
3000 |
380 |
25 |
12*240 |
26.5 |
| QD3-82/5-2.2 |
3 |
82 |
2.2 |
3000 |
220 |
25 |
12*280 |
35 |
| Q3-82/5-2.2 |
3 |
82 |
2.2 |
3000 |
380 |
25 |
12*260 |
35 |
| QD3-96/6-2.5 |
3 |
96 |
2.5 |
3000 |
220 |
25 |
12*320 |
40 |
| Q3-96/6-1.5 |
3 |
96 |
2.5 |
3000 |
380 |
25 |
12*280 |
40 |
| Q3-112/7-3 |
3 |
112 |
3 |
3000 |
220 |
25 |
12*340 |
43 |
| QD10-26/2-1.5 |
10 |
26 |
1.5 |
3000 |
380 |
50 |
12*240 |
27 |
| Q10-26/2-1.5 |
10 |
26 |
1.5 |
3000 |
220 |
50 |
12*220 |
27 |
| QD10-40/3-2.2 |
10 |
40 |
2.2 |
3000 |
380 |
50 |
12*260 |
32.5 |
| Q10-40/3-2.2 |
10 |
40 |
2.2 |
3000 |
220 |
50 |
12*240 |
32.5 |
| Q10-50/4-2.5 |
10 |
50 |
2.5 |
3000 |
380 |
50 |
12*320 |
40 |
| QD10-50-4-2.5 |
10 |
50 |
2.5 |
3000 |
220 |
50 |
12*280 |
/ |
| Q10-60/5-3 |
10 |
60 |
3 |
3000 |
380 |
50 |
12*340 |
44 |
| QD15-20/2-1.5 |
15 |
20 |
1.5 |
3000 |
220 |
65 |
13.2*180 |
33 |
| Q15-20/2-1.5 |
15 |
20 |
1.5 |
3000 |
380 |
65 |
13.2*180 |
33 |
| QD15-30/3-2.2 |
15 |
30 |
2.2 |
3000 |
220 |
65 |
13.2*220 |
37 |
| Q15-30/3-2.2 |
15 |
30 |
2.2 |
3000 |
380 |
65 |
13.2*200 |
37 |
| QD15-40/4-2.5 |
15 |
40 |
2.5 |
3000 |
220 |
65 |
13.2*240 |
40 |
| Q15-40/4-2.5 |
15 |
40 |
2.5 |
3000 |
380 |
65 |
13.2*220 |
40 |
){kind=link}